UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser: Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 35872

12.1 NGDBUILD - Crash during DRC check if IDDR has unconnected D input

Description

My design fails during NGDBUILD.It crashes inthe phase "Checking expanded design ..." Are there any known problems that can explain this failure?

Solution

A problem has been seen where NGDBUILD will crash during this phase when an IDDR with an undriven D pin is encountered. This problem has been fixed for ISE software 12.2, currently scheduled for late July 2010. Meanwhile, there is no workaround other than to modify the circuit involved. A patch for ISE 12.1 can be requested by opening a webcase and referring to this Answer by number.
AR# 35872
Date Created 05/28/2010
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Spartan-3
  • Spartan-3 XA
  • Spartan-3A
  • More
  • Spartan-3A DSP
  • Spartan-3AN
  • Spartan-3E
  • Spartan-6 LX
  • Spartan-6 LXT
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
Tools
  • ISE Design Suite - 12.1