We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36006

12.1 - SmartXplorer fails when run with a .pxml file and run from command line.


When running SmartXplorer from command line with an xpartition.pxml file, SmartXplorer fails with:

Traceback (most recent call last):
File "../SmartXplorer/smartxplorer.py", line 3159, in <module>
File "../SmartXplorer/smartxplorer.py", line 3153, in smartXplorerMain
File "../SmartXplorer/smartxplorer.py", line 2846, in mainHelper
File "C:\e\E\sx\Python-2.6.2_installed\lib\shutil.py", line 88, in copy
File "C:\e\E\sx\Python-2.6.2_installed\lib\shutil.py", line 47, in copyfiel
shutil.Error: 'C:\..\..\..\xpartition.pxml' and 'C:\..\..\..\xpartition.pxml' are the same files


This problem was fixed for ISE 12.2. For earlier versionsa workaround is to specify a working directory (-wd) in the command:

e.g. smartxplorer -p xc5vlx155t-ff1136-1 -wd smartxplorer_results -uc test.ucf test.ngd
AR# 36006
Date Created 01/21/2011
Last Updated 12/15/2012
Status Active
Type General Article