UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36037

MIG Virtex-6-During custom part generation do I use the IDD values or AC Operating values from the Micron Spec?

Description

Which table (IDD or AC Operating Conditions) should I get the values for when generating a custom part for a Virtex-6 device with MIG?

Solution

The IDD values are used to calculate power so all devices use the same spec numbers for IDD calculations.

Only the Electrical and AC numbers are relevant so the numbers from those tables should be entered when creating a custom part.

Revision History:
09/10/2014 - Initial Release
AR# 36037
Date Created 06/04/2010
Last Updated 09/11/2014
Status Active
Type General Article
Devices
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
IP
  • MIG