We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36389

Virtex6- Reset requirement on MMCM


What are the requirements on reset for MMCM?


The RST signal is an asynchronous reset for the MMCM. The MMCM will synchronously re-enable itself when this signal is released.

The MMCM automatically locks after power on; no extra reset is required.

From the Virtex-6 Data Sheet the minimum reset pulse (RSTMINPULSE) = 1.5 ns.
AR# 36389
Date 07/19/2010
Status Active
Type General Article
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
Page Bookmarked