We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36597

ML605 - S2 Settings for Built-in Self Test Flash Application


What switch settings are necessary when running the Built-In Self Test Flash Application on the ML605 to ensure successful configuration?


To enable successful configuration of the FPGA from the Compact Flash, the following switch settings are needed on the ML605:
  • Set S2 to 011010
  • Set S1 to 1000

For visual confirmation of the switch settings, see the following image:

AR# 36597
Date Created 07/07/2010
Last Updated 12/15/2012
Status Active
Type General Article
  • Virtex-6 LXT
Boards & Kits
  • Virtex-6 FPGA ML605 Evaluation Kit