We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36684

LogiCORE IP Ethernet AVB Endpoint v2.3 - baseaddress name in xavb_g.c should be updated


Errors might seen if the current baseaddress name in xavb_g.c is used.


In xavb_g.c:

XAvb_Config XAvb_ConfigTable[XPAR_XAVB_NUM_INSTANCES] = {
        XPAR_AVB_0_DEVICE_ID,   /* Unique ID of device */
        XPAR_AVB_0_BASEADDR     /* Base address of device */

should be changed to:

XAvb_Config XAvb_ConfigTable[XPAR_XAVB_NUM_INSTANCES] = {
            XPAR_AVB_0_DEVICE_ID,        /* Unique ID of device */
            XPAR_AVB_0_MEM0_BASEADDR     /* Base address of device */

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
35203 LogiCORE IP Ethernet AVB Endpoint v2.3 - Release Notes and Known Issues for ISE 12.1 software N/A N/A
AR# 36684
Date Created 07/09/2010
Last Updated 05/26/2014
Status Archive
Type General Article
  • EDK - 12.1
  • Ethernet AVB