UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36835

SysGen - Why are my Black Box results all zeros?

Description

Why are my Black Box results all zeros?

Solution

Make sure you have a Simulation Mode selected in the Black Box Block. If the Simulation Mode is set to "inactive", then this means the Black Box ignores all input data and writes zeros to its output ports.
AR# 36835
Date Created 07/16/2010
Last Updated 05/13/2013
Status Active
Type General Article
Tools
  • System Generator for DSP - 12.1