We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36938

Project Navigator - Can the order of the tabs in the console area be changed?


When tabs (e.g. Console, Errors, Warnings, Tcl Console) are present in the console area,is there a way tomove them into any arbitrary order?


The Project Navigator GUI does not support drag-and-drop reordering of thepanes in the console area. However, the tabs may be reordered by floating the individual panes and then re-docking them.
To reorder the panes;
  1. Select the tab you wish to move.
  2. Click in the title bar ofthe tab and drag it away from the pane (to another pane or outside of the Project Navigator window).
  3. Drag it back to the console pane area and drop it.
The lasttab dropped on the pane will be the leftmost tab. Therefore, the tab which is desired to be the leftmost tab should be moved last.
AR# 36938
Date Created 07/22/2010
Last Updated 12/15/2012
Status Active
Type General Article
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 12.1
  • More
  • ISE - 8.1i
  • ISE - 9.1i
  • Less