We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37239

12.x Project Navigator - SmartXplorer option is grayed out


Why do I see the SmartXplorer Tool grayed out in the ISE Interface?


Here is the sequence of events where this does happen:

1. Open a Project
2. Select Manual Compile Order mode
3. Close project
4. Reopen same project
5. Select Tools->SmartXplorer menu item. Note that the "Launch SmartXplorer..." is disabled.

If Manual Compile Order is now turned off, the "Launch SmartXplorer..." menu item is enabled again.

This issuewill befixed in ISE Design Suite 13.1.

See also (Xilinx Answer 35807)

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
35807 12.x Project Navigator - SmartXplorer grayed out for a EDK based design N/A N/A
AR# 37239
Date Created 09/24/2010
Last Updated 12/15/2012
Status Active
Type General Article
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3