^
Advanced Search

AR# 37252 Configuration Design Assistant - iMPACT Error Messages

Description

The following are common errors that can occurwhen using the software. These articles provide guidance to resolve these issues.

Note: This Answer Record is part of the Xilinx Configuration Solution Center (Xilinx Answer 34904).

Solution

Common Error Messages

(Xilinx Answer 13529)iMPACT - "ERROR:iMPACT:583 - '2' The IDCODE read from the device does not match the IDCODE in the BSDL file"
(Xilinx Answer 22160)iMPACT - "ERROR:iMPACT:585 - A problem may exist in the hardware..."
(Xilinx Answer 22228)iMPACT - "ERROR:Bitstream:2" and "ERROR:iMPACT:123 - Mask file" are generated during FPGA configuration
(Xilinx Answer 32938)iMPACT - "INFO:iMPACT - Failed to initialize MDM interface" when running BPI Indirect Programming

iMPACT Known Issues

(Xilinx Answer 47890) - 14.x iMPACT - Known Issues for the iMPACT 14.x tools

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
24104 LogiCORE Block Memory Generator v2.2 - When using byte-write feature, the data readout from the memory might not match what is expected N/A N/A
34904 Xilinx Configuration Solution Center N/A N/A

Actions

AR# 37252
Date Created 08/05/2010
Last Updated 01/23/2013
Status Active
Type General Article
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13.1
  • Less
Feed Back