We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37387

Xilinx PlanAhead Design Assistant - Errors and Warnings while importing netlists to create a new PlanAhead project


This section of the Design Assistant provides more information on messages which occur when importing netlists to create a new PlanAhead project.

Note: This Answer Record is a part of the Xilinx PlanAhead Solution Center (Xilinx Answer 37100). The Xilinx PlanAhead Solution Center is available to address all questions related to PlanAhead. Whether you are starting a new design with PlanAhead or troubleshooting a problem, use the PlanAhead Solution Center to guide you to the right information.


See (Xilinx Answer 35610) forngc2edif.exe - A pplication Error

See (Xilinx Answer 31920)for issues relating to project directory

See (Xilinx Answer 34793) for issuesconverting an RTL project into a netlist project

See (Xilinx Answer 33516) for ERROR: launching PlanAhead failed: can't execute "C:\WINDOWS\system32\cmd.exe": The directory name is invalid."
AR# 37387
Date Created 08/20/2010
Last Updated 12/15/2012
Status Active
Type General Article