UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37388

Xilinx PlanAhead Design Assistant - Errors and Warnings while importing constraints to create a new PlanAhead project

Description

This section of the Design Assistant provides more information on messages which occur when importing constraints to create a new PlanAhead project.

Note: This Answer Record is a part of the Xilinx PlanAhead Solution Center (Xilinx Answer 37100). The Xilinx PlanAhead Solution Center is available to address all questions related to PlanAhead. Whether you are starting a new design with PlanAhead or troubleshooting a problem, use the PlanAhead Solution Center to guide you to the right information.

Solution

See (Xilinx Answer 34876) ERROR: [HD-UCFReader 25] Cannot loc instance 'dataOut' at site SLICE_X35Y119 found on line 4, Unknown instance type 'RTL_FDRSE'

See (Xilinx Answer 36893) for issues relating to setting IOstandard for new differential ports created in a pin planning project.
AR# 37388
Date Created 08/20/2010
Last Updated 12/15/2012
Status Active
Type General Article