We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37390

PlanAhead Design Assistant - Floorplanning Functionality and Usage


This part of the PlanAhead Design Assistant focuses on the Functionality and Usage for Floorplanning within the PlanAhead tool. Please select from the options below to find information related to your specific flow.

NOTE:This Answer Record is a part of the Xilinx PlanAhead Solution Center(Xilinx Answer 37100).The Xilinx PlanAhead Solution Center is available to address all questions related to the PlanAhead tool. Whether you are starting a new design with the PlanAhead tool or troubleshooting a problem, use the PlanAhead Solution Center to guide you to the right information.


(Xilinx Answer 37457)- Where do I find information on closing timing within PlanAhead?
(Xilinx Answer 37458)- What are the different types of constraints that can be applied within PlanAhead?
(Xilinx Answer 37461)- What is the difference between timing results from TRCE and PlanAhead Timing Analysis?
(Xilinx Answer 36620) - Does the slack histogram show TRCE or PlanAhead Timing Analysis Results?
AR# 37390
Date 12/15/2012
Status Archive
Type General Article
  • PlanAhead - 10.1
  • PlanAhead - 10.1 sp1
  • PlanAhead - 10.1 sp2
  • More
  • PlanAhead - 10.1 sp3
  • PlanAhead - 11.1
  • PlanAhead - 11.2
  • PlanAhead - 12.1
  • PlanAhead - 12.2
  • PlanAhead - 12.3
  • PlanAhead - 12.4
  • PlanAhead - 13
  • PlanAhead - 13.1
  • Less
Page Bookmarked