We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37392

PlanAhead Design Assistant - Post-Implementation Analysis Usage and Features


This part of the PlanAhead Design Assistant focuses on the Functionality and Usage for Post-Implementation Analysis within the PlanAhead tool. 

Please select from the options below to find information related to your specific flow.

NOTE: This Answer Record is a part of the Xilinx PlanAhead Solution Center (Xilinx Answer 37100)

The Xilinx PlanAhead Solution Center is available to address all questions related to the PlanAhead software. 

Whether you are starting a new design with the PlanAhead tool or troubleshooting a problem, use the PlanAhead Solution Center to guide you to the right information.


(Xilinx Answer 37461) - What is the difference between timing results from TRCE and PlanAhead Timing Analysis?
(Xilinx Answer 37457) - Where do I find information on closing timing within PlanAhead?
(Xilinx Answer 36620) - Does the slack histogram show TRCE or PlanAhead Timing Analysis Results?
AR# 37392
Date Created 08/19/2010
Last Updated 08/11/2014
Status Active
Type General Article