We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37464

Xilinx PlanAhead Design Assistant - Errors and Warnings while importing Placement Results


This portion of the Design Assistant will assist you with resolving errors and warnings that you receive when importing placement results within the PlanAhead tool.

Note: This Answer Record is a part of the Xilinx PlanAhead Solution Center (Xilinx Answer 37100).  The Xilinx PlanAhead Solution Center is available to address all questions related to the PlanAhead tool.  Whether you are starting a new design with the PlanAhead tool or troubleshooting a problem, use the PlanAhead Solution Center to guide you to the right information.


See (Xilinx Answer 30154) for "WARN: [HD-PAR 0] Cannot Open File : /.ncd"

See (Xilinx Answer 33380) when DCM placement is not shown in the device view.

See (Xilinx Answer 33060) when some blocks does not have placment information when importing an .ncd
AR# 37464
Date Created 08/20/2010
Last Updated 05/26/2014
Status Archive
Type General Article