We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37630

12.2 PlanAhead - Application crash when running DRC on Spartan-6 pinout


I have created an I/O pin planning project for a Spartan-6 device. I have imported the .ucf and when I try to do the DRC check, PlanAhead tool crashes with no stack trace.

The following message was printed on the console

planAhead: alg/rulecheck/HARCCheckStdType.cxx:160: void HARCCheckStdType::checkDirection_(HARCVioResults&) const: Assertion `false' failed.
/proj/rdi-xco/public/latest_HEAD/cust_rtf/planAhead/bin/rdiArgs.sh: line 62: 5390 Aborted $RDI_PROG $*

How do I fix this issue.


This crash has been associated with anunsupported IOSTANDARD.

Re-open the project and if there is a port with LVPECL_33 IOSTANDARD, please change that to another IOSTANDARD and re-run DRC.

This issue has been fixed inPlanAhead tool 13.1.

AR# 37630
Date Created 12/14/2012
Last Updated 12/14/2012
Status Active
Type Known Issues