We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37693

PlanAhead - Why is the synthesized netlist required when I import ISE Place & Route Results to create a PlanAhead project


When I create a PlanAhead project and select "Import ISE Place & Route Results", it requires not only the NCD/XDL and TWX files but also the synthesized netlist files. Why is the netlist required when I importISE Place & Route Results?


The PlanAhead Tool is designed to work based on the synthesized netlist. The netlist is required if you want to analyze the placement/timing and floorplan the design. Furthermore, the netlist isindispensable if you want to run Implementation in the PlanAhead tool.
AR# 37693
Date 12/15/2012
Status Archive
Type General Article
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 13.1
  • Less
Page Bookmarked