We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3812

M1.4 PAR - Nodes list for Turns Engine doesn't accept special characters


When trying to use the Turns Engine (-n x and -m nodes_file) it
does not parse the following special characters in machine

For example:

pile-31 -> Par reports it is trying to connect to pile
mt_hood -> Par reports it is trying to connect to mt


This problem is fixed in the latest M1.4 Core Tools Update
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip

AR# 3812
Date Created 08/31/2007
Last Updated 10/21/2008
Status Archive
Type General Article