We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38467

MIG Spartan-6 MCB - Can't find CTRL_STATE in the simulation


I cannot find CTRL_STATE which is a debug signal that is described in UG416
http://www.xilinx.com/support/documentation/ip_documentation/ug416.pdf, page 51.

Where can I find CTRL_STATE?


This signal is only available if you select Verilog as design language. They are available in encrypted form in secureip mcb_001.vp, which is only available in simulation.
AR# 38467
Date Created 10/18/2010
Last Updated 10/18/2010
Status Active
Type General Article
  • MIG