^
Advanced Search

AR# 38572 ML405 - Are the jumpers J15 and J23 on RevB ML405 boards?

Description

Jumpers J15 and J23 are listed in the Evaluation Platform User Guide for the ML 405, UG210; however,they are not found in theschematics.

Are these jumpers located on RevB ML405 boards?

Solution

The jumpers J15, J23, and J16 are used on RevB ML405 boards to set the VCCO for bank 7 (either to 2.5 V or 3.3 V). These jumpers are currently not shown in the schematic, but their use and settings are listed in UG210, the ML405 Evaluation Platform User Guide.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
37874 ML40x - Known Issues and Release Notes Master Answer Record N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
37874 ML40x - Known Issues and Release Notes Master Answer Record N/A N/A

Actions

AR# 38572
Date Created 10/19/2010
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Virtex-4 FX
Boards & Kits
  • ML405
Feed Back