UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38576

12.4/13.4/14.7 MAP - "FATAL_ERROR:MapLib:basmmlut.c:528:1.33"

Description


The following Fatal Error can occur during MAP:

FATAL_ERROR:MapLib:.c:528:1.33 - simulate to inv, but no in pin.
Process will terminate. For technical support on this issue, please open a
WebCase with this project attached at http://www.xilinx.com/support.



What is the cause of this error?

Solution


This error might be due to the incorrect trimming of the LUT6_2 or of the feedback path in the circuit.

The following environment variables prevent the incorrect trimming which might resolve the problem.

Linux:
setenv XIL_MAP_LUT6_2_NO_OPTIMIZATIONS 1
setenv XIL_MAP_BOOT_CYCLE_POP_COMPLEX 1

Windows:

SET XIL_MAP_LUT6_2_NO_OPTIMIZATIONS=1
SET XIL_MAP_BOOT_CYCLE_POP_COMPLEX=1
AR# 38576
Date Created 10/12/2010
Last Updated 09/09/2014
Status Active
Type Error Message
Tools
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • More
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
  • ISE Design Suite - 14.1
  • ISE Design Suite - 12
  • ISE Design Suite - 14
  • Less