UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38685

MIG DDR2- Can MIG be used to send DDR2 memory into power-down mode?

Description

Can MIG be used to send my DDR2 memory into power-down mode?

NOTE: This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.

Solution

MIG does not support power-down mode.You need to use a third party IP or write your own controller and adhere to the DDR2 JEDEC specification if you want to use the power-down mode.

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
34330 MIG Virtex-6 DDR2/DDR3 - JEDEC Specification N/A N/A
AR# 38685
Date Created 06/10/2011
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
IP
  • MIG