We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 38874

12.3 CompXLib - SecureIP is not compiled when using ModelSim SE/PE 6.3c


When I run CompXlib to compile simulation libraries for ModelSim SE/PE 6.3c with ISE 12.3, SecureIP is not compiled.

In the compxlib.log file, I do no find any messages about SecureIP.
What is the problem?


This happens because ModelSim SE/PE 6.3c is an older version that matches ISE 10.1 but not ISE 12.3.

The supported ModelSim version for ISE 12.3 is 6.5c.

To resolve this problem, use ModelSim SE/PE 6.5c instead.

To find the supported Simulator versions, please refer to the "Synthesis and Simulation Design Guide".

<ISE installation directory>\ISE_DS\ISE\doc\usenglish\isehelp\sim.pdf
AR# 38874
Date Created 11/02/2010
Last Updated 11/26/2014
Status Active
Type General Article
  • ISE Design Suite - 12.3