We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39120

iMPACT - Are Top, Bottom, and Uniform Block sector N25Q flash supported for indirect SPI programming?


In the 12.3 version of iMPACT help the indirect SPI programming section it states that:

"For Numonyx N25Q, both 3.3V and 1.8V versions are supported. Uniform block sectors only."

Can I use a Top or Bottom block sector N25Q flash?


The Help is incorrect. Top, bottom, and uniform boot sectors are all supported.
AR# 39120
Date Created 11/29/2010
Last Updated 05/19/2011
Status Active
Type General Article
  • Spartan-6 LX
  • Spartan-6 LXT
  • Virtex-5 FXT
  • More
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-5QV
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3