UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39194

11.4 EDK, MPMC - Is there a Static PHY example available?

Description

Is there an example of the MPMC Static PHY? My Spartan-3, Virtex-4, Virtex-5 pinout is not MIG-compatible, so I cannot use a preferred MIG controller.

Solution


A collection of MPMC Static PHY projects can be downloaded from:
http://www.xilinx.com/txpatches/pub/applications/misc/ar39194.zip
These projects are potentially targeted from different tool versions and arelikely to require manual adjustments to be opened in recent tool versions. However, the connectivity of the MPMC Static PHY has not changed; see the MPMC datasheet for more information on the MPMC Static PHY and its requirements.
When using the static PHY, each family has potentially different DCM/MMCM phase shift boundaries which must be configured in the embedded calibration software.
AR# 39194
Date Created 11/18/2010
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Virtex-4 FX
  • Virtex-4 LX
  • Virtex-4 QPro/R
  • More
  • Virtex-4 SX
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-5QV
  • Spartan-3
  • Spartan-3 XA
  • Spartan-3A
  • Spartan-3A DSP
  • Spartan-3AN
  • Spartan-3E
  • Less
Tools
  • EDK - 10.1 sp3
  • EDK - 11.1
  • EDK - 11.2
  • More
  • EDK - 11.3
  • EDK - 11.4
  • EDK - 11.5
  • EDK - 12.1
  • EDK - 12.2
  • EDK - 12.3
  • EDK - 13.1
  • Less
IP
  • Multi-Port Memory Controller (MPMC)