UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39220

ChipScope - How can I enable "Match Unit Counter"?

Description

I see in the ChipScope Pro Analyzer tool that there is a "Counter" along with each Match Unit. But, it showsa greyed-out"disable"that is not changeable. How can I enable the "Match Unit Counter" feature of the ChipScope tool?

Solution

The "Match Unit Counter" is enabled/disabled when you generate the ILA core in CORE Generator or insert the ILA in CORE Inserter. By default, it is disabled.To include a match counter on each match unit in the trigger port, select a counter width from 1 to 32. See screenshots below.

1. CORE Generator



2. CORE Inserter

AR# 39220
Date Created 12/21/2010
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ChipScope Pro - 11.3
  • ChipScope Pro - 11.4
  • ChipScope Pro - 11.5
  • More
  • ChipScope Pro - 10.1
  • ChipScope Pro - 10.1 sp1
  • ChipScope Pro - 10.1 sp2
  • ChipScope Pro - 10.1 sp3
  • ChipScope Pro - 11.1
  • ChipScope Pro - 11.2
  • ChipScope Pro - 12.1
  • ChipScope Pro - 12.2
  • ChipScope Pro - 12.3
  • ChipScope Pro - 13.1
  • ChipScope Pro - 8.1i
  • ChipScope Pro - 8.1i sp1
  • ChipScope Pro - 8.1i sp2
  • ChipScope Pro - 8.1i sp3
  • ChipScope Pro - 8.2i
  • ChipScope Pro - 8.2i sp1
  • ChipScope Pro - 8.2i sp2
  • ChipScope Pro - 8.2i sp3
  • ChipScope Pro - 9.1i
  • ChipScope Pro - 9.1i sp1
  • ChipScope Pro - 9.1i sp2
  • ChipScope Pro - 9.1i sp3
  • ChipScope Pro - 9.2i
  • ChipScope Pro - 9.2i sp1
  • ChipScope Pro - 9.2i sp2
  • ChipScope Pro - 9.2i sp3
  • ChipScope Pro - 9.2i sp4
  • Less