UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3955

F1.4, Simulator: Probes from schematic macro don't appear in Simulator.

Description

Keywords: Schematic, macro, simulate, current, probes

Urgency: Standard.

General Desciption:
After placing probes on a lower-level schematic-based macro, and then selecting "Simulate Current Macro" these probes do not appear in the simulator.

Solution

This is a bug with the "Simulate Single Component" command. To workaround it, simply add the signals in the waveform viewer with the 'Add Signals' command (Signal -> Add Signals).
AR# 3955
Date Created 05/21/1998
Last Updated 04/04/2000
Status Archive
Type General Article