UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39984

Project Navigator - Can EDIF/NGC netlist file be added into project sources as a submodule?

Description

Can an EDIF/NGC netlist file be added into project sources as a submodule?

Solution


It depends on different ISE software versions.
  • ISE 11.x and before
For ISE 11.x and before,an EDIF/NGC netlist file is not allowed to be added into project sources when the Top-Level source type is not EDIF/NGC. That is to say, the EDIF/NGC netlist file can be added to project sources only when it is the top level.
  • ISE 12.x and later
Since ISE 12.1, EDIF/NGC netlist file can be added to project sources when it is either the top level or submodule.
AR# 39984
Date Created 02/18/2011
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE - 8.1i
  • ISE - 8.1i sp1
  • ISE - 8.1i sp2
  • ISE - 8.1i sp3
  • ISE - 8.2i
  • ISE - 8.2i sp1
  • ISE - 8.2i sp2
  • ISE - 8.2i sp3
  • ISE - 9.1i
  • ISE - 9.1i sp1
  • ISE - 9.1i sp2
  • ISE - 9.1i sp3
  • ISE - 9.2i
  • ISE - 9.2i sp1
  • ISE - 9.2i sp2
  • ISE - 9.2i sp3
  • ISE - 9.2i sp4
  • Less