UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40041

12.x iMPACT - setMode -ss and setMode -spi commands are invalid

Description

In iMPACT 12.x the setMode -ss and setMode -spi commands are invalid. How do I use older project files or batch scripts that use these commands?

Solution

The setMode -ss and setMode -spi commands are invalid and not supported in 12.x. They should be removed from any batch files used. For Projects you will need to regenerate the project file in a 12.x version.
AR# 40041
Date Created 01/13/2011
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Spartan-3 XA
  • Spartan-3A
  • Spartan-3A DSP
  • More
  • Spartan-3AN
  • Spartan-3E
  • Spartan-6 LX
  • Spartan-6 LXT
  • Spartan-6Q
  • Spartan-II
  • Spartan-IIE
  • Spartan-IIE XA
  • Spartan-XL IQ
  • System ACE
  • Virtex
  • Virtex QPro/R
  • Virtex-4 FX
  • Virtex-4 LX
  • Virtex-4 QPro/R
  • Virtex-4 SX
  • Virtex-4Q
  • Virtex-4QV
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-5QV
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Virtex-6Q
  • Less
Tools
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4