UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40118

12.3 EDK - ERROR:EDK - xps_intc_ (xps_intc) - Interrupt Port - 'int_0' cannot be without Sensitivity

Description

Changing the interrupt controller version resulted in the following error message:

ERROR:EDK - xps_intc_0 (xps_intc) - Interrupt Port - 'int_0' cannot be
    without Sensitivity
    (SENSITIVITY=EDGE_RISING|EDGE_FALLING|LEVEL_LOW|LEVEL_HIGH)

Solution

The xps_intc now requires that Sensitivity be set for the interrupt signal tied to the core. 

In order to resolve this issue, set a Sensitivity value for the interrupt signal in the MHS.
AR# 40118
Date Created 01/17/2011
Last Updated 07/07/2014
Status Active
Type Error Message
Tools
  • EDK - 10.1 sp2
  • EDK - 10.1
  • EDK - 10.1 sp1
  • More
  • EDK - 10.1 sp3
  • EDK - 11.1
  • EDK - 11.2
  • EDK - 11.3
  • EDK - 11.4
  • EDK - 11.5
  • EDK - 12.1
  • EDK - 12.2
  • EDK - 12.3
  • EDK - 12.4
  • EDK - 13
  • EDK - 13.1
  • Less
IP
  • XPS Interrupt Controller