"> AR# 40532: MIG Spartan-6 MCB - FPGA Device support


We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40532

MIG Spartan-6 MCB - FPGA Device support


This section of the MIG Design Assistant focuses on FPGA device support for the Spartan-6 Memory Controller Block (MCB). Below you will find information related to your specific question.

Note: This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.


FPGA device support is affected by speed grade, package, family, and, in some cases, might be limited by the memory being interfaced to. In some cases, final performance numbers might still be pending characterization.

See also:

(Xilinx Answer 33234)What Spartan-6 devices and speed grade are supported?

(Xilinx Answer 36364)Spartan-6 - Whatis the -3N speed grade?

(Xilinx Answer 36287)What are the MCB performance specs for Spartan-6 -1L? Is DDR3 supported?

Linked Answer Records

Associated Answer Records

AR# 40532
Date Created 08/22/2011
Last Updated 12/15/2012
Status Active
Type General Article
  • Spartan-6 LX
  • Spartan-6 LXT
  • Spartan-6Q
  • MIG