We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4061

M1.4 Map - Unable to RLOC tbufs to column 0: ERROR:baste:117 - RLOC_ORIGIN value ...


The following error has been seen in a design with
32 tbufs in a same column RLOCed from R0C0.1 to R15C0.2.

ERROR:baste:117 - RLOC_ORIGIN value of "R8C0" on TBUF32
symbol "tbzero", when added to the RLOC values, does not
correspond to a valid site name.

If these are RLOC_ORIGINed to any other column, no problem.

Problem: m1.4 mapper could not place RPMed TBUFs in Column 0.


This problem is fixed in the latest M1.4 Core Tools Update
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip
AR# 4061
Date Created 06/10/1998
Last Updated 04/03/2000
Status Archive
Type General Article