UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40683

MIG Spartan-6 MCB - PHY Architecture

Description

The Physical interface of the MIG Spartan-6 MCB controls the initialization sequence and calibration.

Note:This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.

Solution

The PHY converts the controller instructions into the actual timing relationships and DDR signaling necessary to communicate with the memory device. The PHY also deals with calibration optimal performance and reliability.

For more information on the PHY architecture, pleasesee the following Design Assistant Answer Records:

(Xilinx Answer 43630) - PHY Calibration Steps

(Xilinx Answer 43673) - PHY Signals and Parameter Description

(Xilinx Answer 43671) - Standalone PHY Support

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
43673 MIG Spartan-6 MCB - PHY Signals and Parameter Descriptions N/A N/A
43630 MIG Spartan-6 MCB - PHY Calibration Steps N/A N/A
37498 MIG Design Assistant - Spartan-6 Core Functionality N/A N/A
AR# 40683
Date Created 08/25/2011
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Spartan-6 LX
  • Spartan-6 LXT
IP
  • MIG