We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41049

UG347 - GPIO switch incorrectly labeled


The ML505/ML506/ML507 Evaluation Platform User Guide v3.1.1 (UG347) lists the DIP Switch Connections (SW4) in Table 1-5, page 20. 

The GPIO switch is labeled SW4 in the user guide, however, the schematics show this as SW8. 

Which one is correct?


The schematic is correct.

It is SW8 on the board silkscreen and in the schematic. This switch should read SW8 in the User Guide. 

The ML505/ML506/ML507 Evaluation Platform User Guide v3.1.2 (UG347) reflects this change.

AR# 41049
Date Created 03/03/2011
Last Updated 05/23/2014
Status Archive
Type General Article
Boards & Kits
  • ML505
  • ML506
  • ML507