We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41089

MIG Virtex-6 DDR3 - Can TwinDie DDR3 components be supported on Virtex-6?


Can TwinDie DDR3 components be supported on Virtex-6 FPGA?

NOTE:This Answer Record is part of the Xilinx MIG Solution Center(Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.


Yes, TwinDie components and DIMMs are supported for Virtex-6 designs, however,the MIG controller only calibrates to a single rank. Because of this fact, the maximum supported frequency is 303 MHz. The MIG GUI has built-in support for a few TwinDieparts, which can be used as the base part when creating your own customer memory part.

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
34413 MIG Virtex-6 DDR2/DDR3 - Supported Memory Devices N/A N/A
AR# 41089
Date Created 03/10/2011
Last Updated 12/15/2012
Status Active
Type General Article
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Virtex-6Q
  • Less
  • MIG