We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41275

MIG- V3.7 : Traffic generator is not working for V6 AXI interface in simulation.


MIG v3.7 AXI enabled designs are not sending traffic after calibration is done in simulation.

This issue is seen when selecting Virtex 6 devices.


The issue is expected to be fixed in the 13.2 release.

To work around this issue in 13.1 replace the attached files in the /example_design/rtl/traffic_gen folder.


Associated Attachments

Name File Size File Type
tg.v 23 KB V
axi4_wrapper.v 31 KB V

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
39128 MIG Virtex-6 and Spartan-6 v3.7 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A
AR# 41275
Date 08/07/2014
Status Active
Type General Article
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Virtex-6Q
  • Less
  • MIG
Page Bookmarked