UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41350

14.1 Timing Analysis - When should I use the absolute MIN speed grade?

Description

When should I use the "MIN" speed grade in either trace or Timing Analyzer?

Solution

The "MIN" speed grade is intended to be used to determine what the fastest clock-to-out times are for your design output paths.It is not intended to be used for setup/hold times for internal synchronous elements to internal synchronous elements, norsetup/hold times for input paths.
AR# 41350
Date Created 03/22/2011
Last Updated 02/27/2013
Status Active
Type General Article
Devices
  • Virtex-4 FX
  • Virtex-4 LX
  • Virtex-4 QPro/R
  • More
  • Virtex-4 SX
  • Virtex-4Q
  • Virtex-4QV
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-5QV
  • Less
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • Less