We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41392

ChipScope IBERT - Why is the RX Sampling Slider grayed out?


When I try to change the RX sampling point, I see the slider is grayed out and cannot be moved.

The horizontal eye scan feature on the Sweeping cannot be used either.


The horizontal scan is supported only when PLL_RXDIVSEL_OUT is set to 1.

This is a general restriction on transceivers.

AR# 41392
Date Created 03/23/2011
Last Updated 11/17/2014
Status Active
Type General Article
  • Virtex-5