We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41446

Configuration - Generic Answer Records for obsolete devices covered in XCN11003/XCN12026


Note: This Answer Record is part of the Xilinx Obsolete Device Solution Center (Xilinx Answer 40174) which is available to address questions related to obsolete devices. Specifically, the devices covered by XCN12026.


(Xilinx Answer 5154) FPGA Configuration - Is it possible to stop CCLK during configuration?
(Xilinx Answer 5865) Virtex-II/-II Pro/-4/-5/-6 Configuration - The DONE pin goes High, but the device does not start up (I/Os are inactive / 3-stated)
(Xilinx Answer 8265) What is the format of the IDCODE for Xilinx devices?
(Xilinx Answer 14456) System ACE CF - The ERROR LED turns on when configuring devices with a CF card
(Xilinx Answer 19866) Virtex-II/-II Pro, Spartan-3 Configuration - FPGAs configured in serial mode do not wake up to function correctly even though I have DriveDONE set for the last device in the daisy chain
(Xilinx Answer 20429) Platform Cable USB - Frequently Asked Questions (FAQs)  

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
40756 Xilinx Obsolete Device Solution Center - Configuration for devices covered by XCN12026 N/A N/A
AR# 41446
Date Created 04/11/2011
Last Updated 05/26/2014
Status Archive
Type General Article
  • Spartan-IIE
  • Spartan-IIE XA
  • Virtex-EM
  • More
  • Virtex-E
  • Virtex-II
  • Less