"> AR# 41564: 13.1 EDK - NGDBuild crashes while attempting to process a BMM file


We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 41564

13.1 EDK - NGDBuild crashes while attempting to process a BMM file


I have a MicroBlaze AXI processor based design with a couple of block RAM memory controllers. One memory controller is the LMB controller and the other is the axi_bram_ctrl_xxx. When my design runs through NGDBuild, it crashes with the following error:

The console makes it appear as if the process is still running:


Data2MEM was not handling the BMM file when concatenated memory controllers were being used. A Data2MEM patch has been created to correct this issue.

1. Download the patch appropriate for your platform.
2. Notice the files in the ZIP file and make a backup of those originally installed data2mem files.
3. Unzip the contents of the ZIP file to the root directory of the XILINX ISE installation.

These patches are to become mainstream in 13.2:

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
40258 13.x EDK - What patches are currently available for 13.x EDK? N/A N/A
39843 13.x EDK - Master Answer Record N/A N/A
AR# 41564
Date 12/15/2012
Status Active
Type General Article
  • EDK - 13.1