UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4179

C1.4 COREGEN Installation gives message "The Register is Not Properly Configured for CORE Generator. Please Reinstall Original Software."

Description

Keywords: Coregen, install, Registery, Configured, re-install

Urgency: Standard

General Description
When installing a Coregen patch from Xilinx web site on to your PC-Win NT, you may get this message:

"The Register is Not Properly Configured for CORE Generator. Please reinstall original software."

Solution

You will get this message if the original C1.4 Coregen software has not been
installed onto that PC. Only the Coregen patch is available from the Xilinx web site.
You must install the original Coregen software from the CD.

AR# 4179
Date Created 07/01/1998
Last Updated 01/05/2000
Status Archive
Type General Article