We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41815

13.1 PlanAhead - "ERROR: [PAR-2] On line 100, Bel element '_ROUTETHROUGH' in site 'OLOGIC_X5Y2' (primitive 'OLOGIC2') is not a valid bel element"


When I implement the design through the PlanAhead tool, the design implements fine without any errors, butin the designsummary and in theTcl console it reports the following error:

"ERROR: [PAR-2] On line 100, Bel element '_ROUTETHROUGH' in site 'OLOGIC_X5Y2' (primitive 'OLOGIC2') is not a valid bel element. Instance 'my_instance' will not be placed properly.Please cross-check the xdl file and the .xdlrc file."


The 13.1 PlanAhead toolis unable to handle the route through an OLOGIC element.This prevents the importation ofthe placement into the PlanAhead tool.

This issue has been resolved in the 13.2 PlanAhead tool.

AR# 41815
Date Created 07/07/2011
Last Updated 05/19/2012
Status Archive
Type Known Issues
  • PlanAhead - 13.1