UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4193

M1.5: Trce core dumps or causes an application error

Description

General Description: This solution is for a specific set of conditions. If your design is causing a core dump or application error and you do not meet all 4 of the conditions please contact the Hotline.

1- Design contains a ILFFX, ILFFXI, or a ILFLX, where the clock and the gate are driven with different clocks.

2- Design must not contain timing constraints.

3- Must be running TRCE in Verbose Mode. This is -v on the command line.

4- Must be running TRCE in Advanced Mode. This is -a on the command line.

Solution

The workaround is to add disable = "Toksek" to the pcf file before running TRCE.

Example:

SCHEMATIC START ;

disable = "Toksek";

SCHEMATIC END ;

AR# 4193
Date Created 08/31/2007
Last Updated 01/18/2010
Status Archive
Type General Article