UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 42010

PlanAhead - Cannot set multiple I/O Properties in one Step for the PlanAhead Tool

Description

When using "I/O Pin Planning (PlanAhead) - Pre-Synthesis" from the Project Navigator, I attempt to set the location, I/O standard, and drive strength at the same time in the I/O Port Properties View.

When I click Apply, only the Location gets set. The I/O standard and drive strength need to be set a second time to take effect.

Solution

This is a limitation in the PlanAhead tool.

The properties will need to be set one at a time using the Apply button after each change.
AR# 42010
Date Created 07/07/2011
Last Updated 05/19/2012
Status Archive
Type Known Issues
Tools
  • PlanAhead - 13
  • PlanAhead - 13.1
  • PlanAhead - 13.2
  • More
  • PlanAhead - 13.3
  • PlanAhead - 13.4
  • Less