We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 42240

PlanAhead - How to find the created pblocks in a project?


How can Ieasily identifythe blocks that I grouped with "area_group" constraints in UCF?

In the netlist view, it is hard to identify the blocks since the primitives assigned to them are under different hierarchies.


The Pblocks show in the Physical Constraints view under ROOT hierarchy, as represented in the following figure.

The Physical Constraints view opens in the Floorplanning view layout, or you can open it using Window > Physical Constraints.

AR# 42240
Date Created 07/13/2011
Last Updated 12/15/2012
Status Active
Type General Article
  • PlanAhead - 11.1
  • PlanAhead - 11.2
  • PlanAhead - 12.1
  • More
  • PlanAhead - 12.2
  • PlanAhead - 12.3
  • PlanAhead - 12.4
  • PlanAhead - 13
  • PlanAhead - 13.1
  • PlanAhead - 13.2
  • Less