UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 42340

13.2 EDK, BSB - "ERROR:EDK - No BUS_INTERFACE S_AXI found as specified for PARAMETER C_BASEADDR"

Description

When using the EDK Base System Builder to create a PLB-based system, the following error messages can occur:

"ERROR:EDK - No BUS_INTERFACE S_AXI found as specified for PARAMETER C_BASEADDR -ISE_DS/EDK/hw/XilinxBFMinterface/p cores/cdn_axi4_lite_slave_bfm_wrap_v1_00_a/data/cdn_axi4_lite_slave_bfm_wrap_ v2_1_0.mpd line 78"

"ERROR:EDK - No BUS_INTERFACE S_AXI found as specified for PARAMETER C_HIGHADDR - ISE_DS/EDK/hw/XilinxBFMinterface/p cores/cdn_axi4_lite_slave_bfm_wrap_v1_00_a/data/cdn_axi4_lite_slave_bfm_wrap_ v2_1_0.mpd line 79"

"ERROR:EDK:1848 - Mpd : Error in AssignDefaults/Check"

What do they mean?

Solution

This issue was fixed in EDK 13.2 and should not be visible to any customers.
AR# 42340
Date Created 06/16/2011
Last Updated 12/15/2012
Status Active
Type General Article