^
Advanced Search

AR# 42729 MIG 7 Series v1.1-v1.2 QDRII+ - custom x36 memory part showing the wrong data width

Description

Why after creating a x36 custom memory part am I allowed to select a Data Width of 18?

Solution

This is a known issue with the MIG 7 Series v1.1-v1.2 GUI that incorrectly allows a Data Width of 18 to be selected when a x36 custom memory part was previously created. If the Data Width is not changed to 36, then the user will not be able to move past the Bank Selection Page.

This will be fixed in the ISE 13.3 software release but can be worked around by selecting the correct Data Width of 36 after the customer memory part has been created.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
41227 MIG 7 Series v1.2 - Release Notes and Known Issues for ISE Design Suite 13.2 N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
43099 MIG 7 Series v1.3 - Release Notes and Known Issues for ISE Design Suite 13.3 N/A N/A
41227 MIG 7 Series v1.2 - Release Notes and Known Issues for ISE Design Suite 13.2 N/A N/A
40050 MIG 7 Series v1.1 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A

Actions

AR# 42729
Date Created 06/20/2011
Last Updated 05/20/2012
Status Active
Type Known Issues
Devices
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Virtex-7 HT
IP
  • MIG
Feed Back