UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43005

EDK - How can we run a makefile in ISE environment?

Description

Is it possible to use a makefile with ISE Project Navigator?

Solution

EDK provides a makefile to run the commands in a shell environment.

To create a makefile for use in the ISE environment,use the makefile attached with this Answer Record as reference. Thisattached makefile will run synthesis.

To use this makefile, follow this procedure:

1. Launch a shell environment.
2. At the command prompt type "make Makefile syn". This will generate the netlist.

To extend this makefile to other processes, such as Translate, Map,and PAR,referto the .CMD_LOG file in the project directoryand include the desired commands in the makefile.

AR# 43005
Date Created 03/07/2012
Last Updated 12/15/2012
Status Active
Type General Article