UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43087

PlanAhead - Schematic Slack always shows "SL=N/A"

Description

Afterimplementation completed, display slack in schematic, it always shows: SL= N/A.

Steps: Openschematic (F4), show slack value (Right click -> view -> option-> schematic: add slack)

Solution

The schematic timing data is populated from report_timing, not the ISE TRCE command.

To show the slack value, you should run report_timing.

Steps: Tools -> Timing -> report timing...
AR# 43087
Date Created 04/30/2012
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • PlanAhead - 12.1
  • PlanAhead - 12.2
  • PlanAhead - 12.3
  • More
  • PlanAhead - 12.4
  • PlanAhead - 13
  • PlanAhead - 13.1
  • PlanAhead - 13.2
  • Less