"> AR# 43158: MIG Spartan-6 MCB - Simulation Debug


We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43158

MIG Spartan-6 MCB - Simulation Debug


This section of the MIG Design Assistant focuses on Simulation Debug for Spartan-6MIG designs.Please select from the options belowto find information related to your specific question.

Note:This Answer Record is a part of the Xilinx MIG Solution Center(Xilinx Answer 34243).The Xilinx MIG Solution Center is available to address all questions related to MIG.Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.


The next illustration shows the debug flow for Spartan-6 MIG designs.

For information on how to use the Example Design to identify simulation problems, please refer to (Xilinx Answer 43160).
For debug issues with User Design Simulation, please refer to (Xilinx Answer 43162).

Known Issues for Spartan-6 MIG Designs

  • (Xilinx Answer 35869)MIG - v3.4 - Spartan-6 - When simulating the example design with ModelSim PE I get an "Iteration limit" error.
  • (Xilinx Answer 42928) MIG Spartan-6 MCB - ERROR: Illegal clk period for CAS Latency 3

If above steps still do not help, please open aWebCase.

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
43162 MIG Spartan-6 MCB - User Design Simulation Debug N/A N/A
43160 MIG Design Assistant - Spartan-6 Example Design Simulation N/A N/A
37500 MIG Design Assistant - Spartan-6 Simulation N/A N/A
AR# 43158
Date 02/04/2013
Status Active
Type General Article
  • Spartan-6 LX
  • Spartan-6 LXT
  • Spartan-6Q
  • MIG
Page Bookmarked